Skip to Content

Nightforce ATACR 4-16x42 F1

ATACR is Nightforce’s top line, and the 4-16x42 F1 is the one it designed for precision semi-autos: 320 mm long so there’s rail left for a rangefinder or clip-on, 850 g, and a 34 mm tube. If you want the scope to be the last thing you ever upgrade on the rifle, this is the one.

Try this scope in 3D

See it on our straight-pull AR-15, then look through it at the range.

£ 3,328.99 £ 3,328.99
( £ 0.00/Units)
  • Manufacturer
  • Focal Plane
  • Reticle
Terms and Conditions
Shipping: lead time varies

Why this one

Most people who end up with an ATACR got there the long way round: a cheap scope, then a better one, then this. The 4-16x42 F1 skips a few of those steps. 4x is low enough to find a target quickly off a barricade, 16x is plenty for steel at the distances a .223 is happy at, and because the reticle is in the first focal plane your holds are right at every power, not just at the top.

The ZeroHold elevation turret goes back to zero and stays there, with 26 MRAD (89 MOA) of travel, which is more than a .223 Wylde will ever ask of it. DigIllum illumination and a Power Throw Lever are standard. It isn’t small money. It is the scope you stop shopping after.

Reticles

The reticle sets the turrets: a mil reticle comes with mil clicks and an MOA reticle with MOA clicks, so pick the system you (or your club, or your ballistic app) already use.

  • MIL-XT. A .05 MRAD floating centre dot, .2 MRAD hashes for wind, and a floating dot at every mil down the vertical to hold on. Busy enough to hold off without dialling, clean enough not to get in the way. If you’re starting from nothing, start here.

  • MIL-C F1. The same fine floating dot with .2 MRAD hashes along the horizontal and an inverted-T ranging scale set off to one side. Less in the picture than MIL-XT: for people who dial their elevation rather than hold it.

  • MIL-R F1. A floating crosshair exactly 1 MRAD long, hashes at 1, .5, .2 and .1 MRAD either side, and an offset ranging scale. The classic, uncluttered mil reticle.

  • Horus TREMOR3 (costs more). Horus’s grid for ranging, wind and drop corrections, illuminated at every 2 MRAD down the vertical. A lot to take in, and very quick once you’ve learnt it. For shooters who already think in Horus.

  • MOA-XT. MIL-XT’s idea in MOA: a fine floating centre dot, 1 MOA marks labelled every 2 MOA, and a grid of dots with a bold one every 4 MOA so you can count fast.

  • MOAR F1. A floating 2 MOA crosshair and 1 MOA hashes for ranging and holds, with bold marks at 3 and 9 o’clock. The long-standing MOA choice.

Full specification

Magnification4-16x
Objective42 mm
Tube34 mm
Length12.6″ / 320 mm
Mounting length6.3″ / 160 mm
Weight30.0 oz / 850 g
Eye relief3.5″ / 90 mm
Field of view4x: 9.0 m at 100 m (26.9 ft at 100 yd)
16x: 2.3 m at 100 m (6.9 ft at 100 yd)
Exit pupil10.3 mm at 4x, 2.7 mm at 16x
Focal planeFirst (F1)
Clicks.1 MRAD (mil reticles) or .250 MOA (MOA reticles)
Elevation turretZeroHold
AdjustmentElevation 26 MRAD / 89 MOA; windage 18 MRAD / 60 MOA
Parallax41 m (45 yd) to infinity
IlluminationDigIllum
Power Throw LeverStandard
FinishBlack

Nightforce part numbers

MIL-XTC615
MIL-C F1C588
MIL-R F1C552
Horus TREMOR3C575
MOA-XTC647
MOAR F1C542

Figures are Nightforce’s published specifications.

Mounting it

We fit it in a Reptilia AUS 34 mm mount at 1.54″ (39 mm): one piece of billet 7075-T6, light, and at the right height to get your cheek on a B5 stock and your eye behind the glass on a flat-top AR-15. If you’d rather have Geissele, the Super Precision 34 mm sits at the same height. If it’s going on one of our rifles, we quote the mount with the scope.

Try it first

The rifle builder has this scope modelled, in every reticle we sell it with. Put it on a rifle, change the reticle, then look through it and zoom in on a target at the range.

Try this scope in 3D

Specifications

Reticle MIL-XT™, MIL-C™ F1, MIL-R™ F1, MOA-XT™, MOAR™ F1, Horus TREMOR3™
Manufacturer Nightforce
Focal Plane First